Solar panel 10 Watt, with plastic frame and bracket

Incl. 19% Tax


  • Plastic frame
  • Bracket
  • Small area with a lot of power
  • Shatterproof solar panel

Delivery Time

2-3 Tage

Solar panel 10 Watt, with plastic frame and bracket

Horizont completes the new plastic solar module series

Solar modules are widely used in which the cells are generously distributed over the module surfaces. These are placed in a carrier made of glass, which is usually stabilized and held in place by an aluminium frame. These modules are sensitive to hard impacts or even twisting, as the modules are not very flexible due to their construction. In the modules of the AS units, the cells are placed close together on the module in order to be able to generate a lot of power in a relatively small area. The modules are mounted on a plastic carrier plate and covered with a transparent plastic layer. For stabilization, the modules are placed in a plastic frame made of polycarbonate. This makes the entire unit more flexible, but still highly stable.

The modules can be mounted on the solar bracket 14143 (more information in the catalogue on page 94), which can be used to attach the modules to the safety box, the stretcher box or to poles. In this way, the solar modules can be connected to all common starter batteries. A charge controller is not built into the solar modules and is not necessary for starter batteries, as long as batteries with up to 85 Ah are not charged with more than 10 watts. The solar modules with 20 or 30 watts can be clamped directly onto batteries with more than 85 Ah.

Tip: The solar modules can also be combined with any other manufacturer's electric fencing equipment, provided it is designed for this purpose. The cables of the solar modules without holder have a length of up to 1.8 metres, so that they are long enough to make the connection between the battery and the solar module. 6.3 mm flat plugs are crimped onto the cables. Non-insulated crocodile clips are connected to these. This allows the solar module to be clamped directly onto the battery and the connection terminals of the electric fence unit to be simply attached above it. Since battery-powered devices often do not have an ON/OFF switch and are switched off by disconnecting them from the battery, the device can simply be removed from the battery while the solar module continues to charge the battery.

A fixed connection between the solar module and the unit has proven to be disadvantageous in practice, as the unit can be supplied with energy via the solar module even though the unit is disconnected from the battery. The solar modules with 10, 20 and 30 watts are available with the solar bracket 14462, which can be used to attach the solar modules to the farmer AN1000, ranger AN2000, ranger AN3000 and ranger AN4800 units. The solar modules are then connected in the units to the circuit board on which a solar charge controller is installed. This then also enables connection to Super Vlies batteries. The 5 and 10 watt solar modules are available with a special solar bracket that allows them to be mounted directly on the farmer ABN and hotshock ABN units.


Special features

  • Robust plastic solar panel
  • Environmentally friendly use of solar energy
  • Mounting device for solar panel -
  • The cables of the solar panels without holder have a length of up to 1.8 metres -
  • Particularly sturdy housing, impact-resistant plastic with UV stabiliser -
  • Solar charge control system weather-protected - Easy charging of various battery types -
  • Tested and built according to the applicable EU directives and the safety standard EN60335-7-76 and DIN EN ISO 9001

Range of application

For all 12 volt special batteries and all common starter batteries. When using with super-fleece batteries, a suitable solar charge regulator must be used.


The modules can be mounted on the 14923 pole. The pole can be firmly inserted into the ground. The stand pole can be easily moved and placed next to the battery.

Suitable for:

  • Electric fencers: farmer AN1000
  • Batteries up to 85 Ah


  • Mounting on unit: via pre-mounted solar bracket (14462)
  • Ground mounting: with solar bracket (14923)
  • Mounting on carrying or safety box: with solar bracket (14143)

Charge controller:

Not required, as the charge controller is built into the recommended horizont electric fence, or is not required.

Technical data:

  • Solar module: monocrystalline, plastic
  • frame: Plastic
  • L x W x H: 39.0 x 29.6 x 2.8 cm


Scope of delivery:

  • Solar module with battery connection clamps
  • Solar module with pre-mounted solar bracket 14462




Delivery time 2-3 Tage
Suitable for farmer AN1000 and batteries up to 85 Ah

These articles might also interest you